Volscan Profiler software update

For Windows 10 and Windows 11. Intel 32 bit or 64 bit Multicore CPU or AMD equivalent processors are supported.

You will need your CD installation number to install this software.

If you do not have a number then please contact your distributor or salesperson and they will be able to obtain one from us. We can only provide numbers directly if you have previously registered your software and provided your company name, email address and machine serial number.

198 MB

The software installation contains the latest version of firmware that was available at the time the package was built. The firmware download further down this page is the latest version available.

To update the firmware, download and unpack the XTCUpdate_3_00499.zip file; then send the XTCUpdate_3_00499.pac file to the Ceramscan instrument, either via the software or the instrument's HTTP interface.

You can also copy the XTCUpdate_3_00499.pac file into a folder called XTC on a USB memory stick. Then connect the memory stick to the instrument and log in on the TSI using an administrator account. Touch ‘Yes’ when prompted to check for updates and follow further on-screen prompts.

16.1 MB

Download a zip file containing the minimum DirectX files required for the 3D view. These files are optional as you may already have Direct X installed or you might decide to use OpenGL. The zip file contains a setup program and some cab files that need to be extracted to a single folder.